Technology

Impact of 3D Printing Sydney in the Movie Industry

Movie Set
Working cameraman shooting with a professional video camera on a stand. Television productions studio with stage lighting equipment, softbox, LED, spot, continuous, floodlights. Flat vector illustration

The uses of 3D printing are exceptionally varied: from food to vehicle components, this innovation is utilized to develop a wide range of forms from numerous products. The movie industry is one more area where 3D printing technology shows its complete possibility. Award-winning and highly preferred films such as Avatar, Iron Man, or Black Panther have utilized 3D printing to make sets, props, parts of various kinds, and so on. The film industry can currently use the style, flexibility, and versatility of 3D innovations and spotlight the cinema.

3D Printing Sydney Benefits in the Movies

The target market is becoming a growing number of meticulous, requiring significantly high quality and accuracy from filmmakers. Therefore, it is necessary to notice the tiniest information when making a movie, not just in terms of content, but also in regards to layout. Also, the smallest element of a garment or an accessory can play a crucial function. 3D printing permits a specific level of reproducibility. This implies that a developer can establish a model and then 3D print it several times in a concise time.

3D printing Sydney in the world of movie theater makes it possible first to produce prototypes or publish numerous different variations and compare them with each other. This uses higher versatility. In case a part breaks throughout shooting, it could be printed once more instead of rapidly. Additionally, with a modest modification, a component can be developed before the actor has tried it out; it need not be adapted to its measurements before it is created. Because some 3D printers are easy to transport, production can be done on-site, avoiding the lengthy and expensive delivery of the props.

Added to these time and expense financial savings, 3D printing supplies excellent layout flexibility. It is likely to produce components that would be unimaginable with other manufacturing approaches. This design freedom schedules in part to the vast array of materials available for 3D printing. In addition to the visual element, there are practical benefits during shooting: thanks to lightweight products and tooth cavities, it is feasible to create much lighter outfits and props that look extremely solid on the screen.

The Challenges

That post-processing time is tough to handle for filmmakers utilizing 3D printing. The moment factor, which plays a significant duty in movie production, leads to high personnel expenses. Commonly, many costumes and props need to be generated, and hands-on post-processing is consequently time-consuming.

The Future of 3D Printing

3D printing has already added to several exciting and award-winning movie jobs and is unlikely to quit there. We have not been able to obtain any more details regarding future tasks– the sector remains highly secretive, but that hasn’t stopped us from gauging the effect of additive production in cinema. Could it become an indispensable part of outfit layout and prop advancement and change various other processes? After all, the globe of the movie theater has commonly been formed by technological modifications; sometimes, that is exactly what drives the sector ahead.

The Best Areas to Set Up Your 3D Printer Brisbane

3D Printer at home setup

3D printing is a fantastic pastime; however, it should not be taking control of the rest of your life. When choosing a spot for your 3D printer in your home, ensure to position it in a separate room and not interfere with your typical living problems.

If you intend on taking this leisure activity seriously, after that, you will likely end up building an entire workshop for your devices and also materials. This is something you can plan for.

Where to Set Up Your 3D Printer Brisbane

Garage

If you have sufficient room in your garage, after that, it would possibly be the very best area to set up a 3D printer. Not only does a garage generally have great deals of space for your tools and materials. However, it is easy to give airflow by opening some home windows or the garage door itself.

One more benefit of using the garage is that it is typically separated from the rest of the home. This indicates that you and your household won’t be bothered by the sound and unpleasant fumes from the 3D printer while it is running.

Home Office, Laundry Area, or Basement

If a garage is not an alternative, some other spaces inside your house can be considered. A home office or laundry room can be sensible considering that these are not locations of your house where individuals remain for extended periods. You can establish a 3D printing job and step out of the room while it runs.

The basement is one more suitable option if you have adequate space. It’s separated enough from the house that you probably won’t listen to any noise from the 3D printer. The additional possible trouble is that most basements have inadequate airflow. Just make sure that you do not have flammable products stored in the basement.

Set Up a Camera

A typical item of guidance is that individuals ought not to be stuck around in the same room as a 3D printer while it is running. This minimizes the danger of breathing in poisonous fumes or plastic micro-particles. Nevertheless, we also comprehend that watching a model being constructed is a crucial part of the 3D printing experience.

An excellent middle-ground remedy is to establish a wireless electronic camera to ensure that you can check it from another location. With a remote camera, you can keep an eye on your 3D printing job also while it remains in an isolated place as you deal with your day.

Restrict Access to Your Work Area

An essential factor for separating your 3D Printer Brisbane is seeing to it that children and pets can’t just go near it without your guidance. If you have children walking around your home, just make sure to secure the door behind you. This is much easier to do in separated workshops however ought to still be implemented for cellars or home offices.

These tips consider safety, security, and usefulness when selecting a spot for your 3D printer. Other elements may influence the top quality of your outcome or products. If you print with filaments, it would be far better to position your workshop in an area with low humidity. If you print with resin, see that your workspace is not under straight sunlight.

Ultimate Guide to the Benefits of Using a 3D Printer Brisbane

3D Printing Technology

From buildings to prosthetics to aerospace and food, 3D printing is an advancing production strategy getting increasingly preferred day by day. Despite being in its development, 3D printing has taken the manufacturing world by storm with its unrivaled advantages and incredible potential.

Whether you’re an utter novice or an established professional, you’re most likely to like the adhering to explanation as well as tips on 3D printing. So, without more trouble, here is the complete guide into the world of 3D printing as it exposes all that you require to understand in the simplest and most helpful means.

What is 3D printing?

3D printing is the process of creating three-dimensional objects based upon a predesigned digital model.

It functions as a modern layering technology, i.e., manufacturing products by publishing layers upon layers until the entire thing is created.

Whether it’s an art piece, an architectural shape, a prototype of a product that you want to test, a house accessory, an automobile part, a biomedical tool, an aerospace part, and even a biological body organ, by developing layer upon layer, you can develop, with high degrees of complexity.

Currently, naturally, this depends on the limitations of the 3D printer you’re making use of.

3D Printer Brisbane Benefits

Quick Manufacturing

Among one the most vital consider production is time. The production time must be made as brief as possible while keeping quality. 3D printing can conserve a lot of time. That is why it is offered the alternate name ‘fast prototyping’. Quick prototyping is essentially a one-step manufacturing process that assists in minimizing procedure time while preserving complexity, accuracy, and fidelity to the end product.

Intricacy and Versatility in Design

Conventional manufacturing strategies impose limitations when it pertains to freedom of layout and complexity. Needs such as undercuts, draft angles, and tool accessibility limit the design leeway. 3D printing obtains you around this concern due to its innate layering technique.

No need for all those consuming needs. With 3D printer Brisbane, you can print items with high levels of intricacy and precision.

Individual Customization

Industrial suppliers typically produce products via automation, using the same molds and layout demands to form and generate their products. Changing the shape and style of the product to meet particular consumer requirements, even somewhat, calls for considerable effort and investment.

On the other hand, 3D printing supplies endless freedom and simplicity of customization. Fine-tune your styles as you wish. Give each relative their very own customized present. Establish yourself apart in developing your jewelry design. Produce personalized dental or clinical items for your clients. The possibilities are boundless.

Sustainability and Waste Decrease

Traditional production methods are, necessarily, top-down methods.

They are subtractive. To create the product, they carve through a block of material. They remove significant quantities of unwanted products. This undesirable product goes to waste. Some obtain recycled yet still call for time, initiative, and cash. 3D printing, contrarily, is a bottom-up approach.

It is additive. It makes use of appropriately the needed amount of product for creating the component. Those products, additionally, are mainly recyclable as well as recyclable. Consequently, little to no waste is generated.

What is Jamboard and its Impact on the Future of Work?

Lastly, with the advent of these new digital technologies, we can perform our tasks more effectively and focus on other urgent matters. If this is your first time hearing about a digital whiteboard, then you might be asking what a jamboard is and how people can benefit from it.

What is Jamboard?

It’s a cloud-based digital whiteboard designed to provide a real whiteboard experience but much better. 

Often associated with collaboration and creativity, this innovative tool powered by G Suite is designed primarily for effective and productive collaborations both physically and remotely.  

Features and Interface

The kind of technology utilized in this collaborative tool will surely blow you away. The hardware version of this innovative tool is available in 55” inch with a 4K ultra high definition display that will draw you in as the images and texts are super sharp.

The low latency touch technology feature of this tool delivers a lag-free interactive experience courtesy of its 60Hz refresh rate and 100Hz touch scan rate.

Aside from its hardware version, the tool is also available as a digital app accessible using mobile and Chromebook devices. 

The jamboard interface allows a maximum of 16 users to connect and access it simultaneously with its built-in multi-touchpoint technology.

This particular feature makes remote and in-person collaboration possible and productive. Team members can always participate in every jam session in real-time through their mobile devices. 

Offers Endless Possibilities at Work

With access to a total of 14 collaborative apps included in G Suite like Gmail, Google Docs, Spreadsheets, Meet, Chat, and Google Drive, the possibilities are indeed endless. Also, all these apps can be shared with all team members where they can access during and after jam sessions.

As a presentation tool, Jamboard has an HD wide lens camera for crystal clear video conferencing, a built-in microphone designed to capture sounds from all directions, and speakers to fill the room with a theater-like sound.

Accessories and Connectivity

The digital whiteboard comes with a stylus and an eraser that don’t require charging or batteries to operate. The stylus has a curved sleek white design that is easy to hold, while the eraser has a built-in microfiber cloth that erases everything on the screen.

When it comes to connectivity, the hardware is packed with ports for different external devices. It features 2 USB ports, a USB C and HDMI ports. It also has a Google Cast, which enables devices to stream contents to the screen via a wireless connection.

Impacts of Jamboard on the Future of Work

Jamboard offers endless possibilities in the way we conduct our work and business. With all this digitalization, we can discover new opportunities and provide better alternative solutions to the different obstacles and challenges we come across every day in our work. 

Make Money with 3D Printers: Here’s How

The innovation of 3D printers has transformed how lots of people take a look at the globe of production. It has also created numerous new methods of chance for innovative entrepreneurs.

With additive production technology, items could be created with a high level of alteration and complexity while also lessening expenses. Also, there are currently multitool 3D printers that are more flexible – some even call them all-in-one machines. See the different markets that have been transformed by 3D printing and how to earn more money with a 3D printer.

3D Printers: Offering Ways to Earn More Money

Among the simplest ways to produce income with a 3D printer is to offer the printer as a business service or offer products made with it. Businesses and individuals typically desire objects created via 3D printing, and however, they do not have the devices. Furthermore, as a proficient developer, you can make products and also offer them. For both approaches, you could discover robust industry areas that help in promoting your solutions.

You can deliver your 3D printer as a service and then get orders and get paid for the generated items. It is very easy to sign up with and the site has various resources to assist you out. All you need to do is start an account with a valid e-mail address, list some information regarding your printer, and be ready to begin taking orders.

Rapid Prototyping Solutions

Next up, we have quick prototyping, another 3D printing service that stays in high demand amongst professionals and companies that work in style, architecture, engineering, and building.

Thanks to the 3D printing revolution, a scale prototype could be produced. Professionals may utilize it to show their designs, offer a conceptual discussion, or evaluate the viability of an end product.

Self-made Products and Crafts

Another outstanding method to earn money with a 3D printer is to enter the marketplace for homemade products and customized crafts. Some companies have begun to offer products in this area with the use of 3D printing, and it has brought about many success stories.

3D Printing Courses

Organizations and organizations are using 3D printing to reduce the price of training and improve academic procedures. 3D printing can be made use of to broaden the valuable end naturally in subjects like construction, design, layout, and style.

3D printing offers several terrific chances to make money. But, if you are going to buy this chance, it is imperative to consider a multi-tool 3D printer. These latest versions have compatible tool heads that make them multifunctional.

Having 3D printers is among the best ways to earn money. With such technology, the possibilities of earning more seem limitless. In the next years to come, we can definitely expect more from it. Therefore, it is not enough that you only have one, but be sure that you make the most out of this technology and the many benefits it has to offer.

3D Printers: Tips for Better Print Quality

Numerous businesses make use of 3D printing, a type of additive manufacturing, for prototyping and manufacturing components. It is a computer-based procedure that puts down an item layer after layer up until it is total. It uses metal or plastics and starts with a 3D digital model of the last things.

Below are the suggestions that will aid customers to enhance print’s high quality, along with a couple of bonuses for increasing 3D printing speed.

3D Printers: How to Improve Print Quality

1. Adjust the bed and nozzle

The most convenient way to improve 3D print quality is to ensure the bed is leveled and nozzle distance is correctly established. The majority of printers feature a suggested distance in between beds as well as the nozzle. A feeler gauge or an easy notepad can aid in setting this range. As soon as the nozzle is effectively positioned, the indicator or paper ought to slide under the nozzle. No force is required to get it to go below the nozzle. This process should be duplicated a minimum of three times to guarantee that it’s functioning well.

2. Inspect the nozzle’s temperature

The nozzle temperature, and there could be several nozzles, impacts print quality. On high items, heats typically thaw the top layers as well as warp the last things. If you are printing taller things, include a one-centimeter cube on the opposite side of the printer’s developed plate that is the opposite side to remove the hot nozzle from the component. This will let the nozzle cool. If it is too hot, there will be filament strings in between spaced elements. If strings of filament show up between structures, consider utilizing a shield framework or wall surface. These are generally located in slicer programs.

3. Use various building plates

Different build plates produce various structures on the things. Bed products such as PEI, glass, or Kapton tape typically leave a smooth surface. Painter’s tape or polycarbonate sheets leave a matte surface.

If you are utilizing glue or spray externally, use simply enough to cover the plate. Using excessive adhesive or paint warps the object as well as develops dents. These make it challenging to remove the item from the home plate, and also, requiring it off can harm the things and break the home plate.

technology

Mess around and experiment to identify the best method to produce a surface finish that praises things.

4. Pay attention to the printer’s adjustments

3D printers have attributes and methods that improve print quality. And printers ought to be kept to get the most effective print. As an example, the printer’s rails ought to be cleaned and also lubricated. And the gantry ought to be at the same elevation on both sides of your printer using stepper motors. Also, examine to see if there are any vulnerable points in the framework. Tighten all screws as well as make sure the firmware is upgraded based on the maker’s suggestions.

5. Carefully manage the filament

A lot of filaments are hydrophilic and soak up water from the air, which triggers printing issues. Moist filaments expand during extrusion because water ends up being steam and also runs away from the plastic. The filament commonly snaps or stands out as the steam escapes. There can also be smoke.

You can dry out the filament on the spindle in the oven for a couple of hours at reduced temperatures. Some individuals construct a heated container that holds the filament before it is fed right into the printer.

How Do We Intensify the Signal Strength of WiFi Antennas?

internet connectivity

Even if you happen to have the best WiFi router in the world, it is useless if you don’t know exactly how to optimize it. Incorrectly positioned WiFi antennas and routers pave the way for weak WiFi signals and a restricted WiFi range. 

The odds of experiencing flawless Internet connectivity are there only when you have the relevant settings in a place like a WiFi router location adjusted correctly.

WiFi transmissions are qualified electromagnetic waves, similar to your cell phone or radio. Unlike AM waves, which are hundreds of meters long, WiFi signals are only a few millimeters long, with a maximum distance of 150 feet from a source.

3 Classifications Based on Radiation Pattern

  • Omni Directional Antenna
  • Directional Antenna
  • Semi-Directional Antenna

Omnidirectional WiFi Antennas transmit electromagnetic waves in all four cardinal directions equally. The semi-directional type of antenna emits radio waves in a specific configuration, whereas direction type antennas transmit energy entirely in a single direction. Most of the time, you will find them in wireless routers and adapters.

With respect to their placement, this type of antenna can be classified into 2 types.

  • Indoor Type
  • Outdoor Type

It is typical for indoor types to come in small and compact sizes. They are used in conjunction with laptops, low-energy USB-type WiFi adapters, WiFi routers, and mobile phones. Antennas for WiFi connectivity of this type, with a very low gain (usually 2dBi-9dBi), are meant for indoor use. 

Outdoor types are designed for transmission and reception over long distances. They are normally placed on rooftops and are capable of transmitting and receiving radio waves over incredibly great distances. They come with a very high gain and many found on the market today are waterproof since they are intended for use outdoors. 

Antenna Positioning and Placement

wifi placement

The position of the WiFi router’s antenna is vital to the WiFi signal speed and range. There are numerous types of WiFi routers available on the market today. Some come with a single antenna, while others have two, and some others even have eight. 

Therefore, where should you place your WiFi router’s antenna to achieve a quicker WiFi network that will give you, say, good, satisfying coverage?

If your WiFi router comes with 2 WiFi antennas, you need to point one of the antennas horizontally, then let the other be in a vertical position. This will allow us to utilize both horizontal and vertical space in our homes. Another key benefit of angling WiFi antennas in this direction is that they are polarized. It is observed that the maximum signal is received when both types of equipment, receiving devices and transmitters, are identically polarized. 

Polarization varies based on the WiFi antenna. The placement of your antenna will vary depending on the device; some will be horizontal, while others will be vertical. By directing WiFi antennae perpendicularly, we can maintain the same polarization in both devices regardless of where you have them. 

The majority of WiFi routers have two WiFi antennae, and in an ideal world, you would position one vertically and the other horizontally. When the internal antennae of client devices like mobile phones or laptop computers are parallel to the router’s antenna, the transmission and reception of WiFi signals will be faster. 

Thus, by maintaining one vertical antenna and one horizontal antenna, there is a greater possibility of connecting the client antenna with at least one of the router antennas and achieving a parallel match.

What Kind of Waterjet Machine Should You Use?

While water jet cutting machines are capable of quickly slicing through a variety of materials, there are occasions you will see that they perform better when used on certain types of material and would thus deliver outstanding results. 

For instance, a standard water jet can cleanly cut and slice through softer materials, whereas an abrasive type of water jet is typically intended for slicing through harder materials. 

The latter category is further classified into a slurry-type of abrasive waterjet cutting system and entrainment water jet cutting machines. Moreover, an abrasive water suspension jet is a more advanced kind of abrasive water jet. It is generally the most efficient when it comes to fast and precision cutting of hard, tough objects.

The mechanical action weakens the binding and eliminates debris from the surface, after which it can be easily rinsed away with the help of a steady stream of water. 

Components of a WaterJet Machine

The following are the basic components of a water jet cutting machine. They can be combined in a variety of ways: 

  • Machine for Memory Guidance (CNC-controlled)
  • Pipework with high pressure
  • Tank with pump for oil
  • Intensifier of pressure
  • motor powered by electricity
  • Desalination and filtration of drinking water
  • Valve and nozzle with a diameter of 0.1 to 0.5 mm

A basic water jet cutting device runs by slicing through a material with a pressurized stream of water. It is best used on soft or cracked objects so that this instrument may cut through the material neatly and seamlessly. 

Did you know that diapers, automobile interiors, and tissue paper can be cut using a standard water jet cutting machine?

automobile interiors

Cutting Solid and Tougher Objects with Water

When it comes to harder, solid, and tough objects, you can process them using an abrasive type of water jet cutting machine. These pieces of equipment use water to propel the abrasive particles on the surface of a solid, hard material. Abrasive particles help facilitate a concentrated or intensified “erosion” on the surface of a hard material, making cutting or slicing through it possible and fast. The jet of water created is usually designed to create a tiny stream of pressurized water. 

As for the abrasive particles used, they are typically pebbles and rocks ground into a sand-like form. The materials you can cut with the abrasive type of water jet would range from stone, metal, ceramics, and an array of other similar items. 

Before pressurization takes place, the abrasive water jet slurry system blends the abrasive particles with water. Regrettably, this process sometimes runs the risk of accelerating the machine’s wear and tear. If such a scenario happens, the odds of frequent maintenance and repair are very high

While the abrasive water jet entrainment system disperses the abrasive particles in a chamber after the water has gone through the nozzle, the alternative method combines the abrasive particles right after the water passes through the nozzle. 

The particles are launched ahead of the water and are then driven out of the aperture at a velocity that’s faster than the flow of water. In many cases, this method will result in reduced wear on the machine.

Due to its fine cutting abilities, many believe the abrasive water suspension jet system ranks equally to some of the most efficient material cutting/slicing systems we have. By suspending the abrasive particles in a water-based gel, water jet cutting machines can drive the gel and direct it centrally towards the direction of the object to be cut.

As you can see, it can be used to slice through small objects such as nuts, and, as such, is commonly employed in micromachining tasks.

What Common Mistakes in 3D Printing in Australia Should You Avoid?

Printing complex designs in the country has never been easier than it is now, thanks to the advent of 3D printing in Australia

As such, the majority of people are under the impression that creating 3D prototypes is a simple task just like everything else. In contrast to this, it is critical to recognize that errors are common in this industry and can occur at any time. As such, in addition to the technical skills required, it is critical to understand the different dynamics that may likely set the stage for a problem to happen or an undesirable outcome to take place.

Understanding these errors and knowing how to avoid them will help you save time, money, and energy. Inadequate insight on this aspect can contribute to unsatisfactory results such as missing faces, geometric inaccuracies, or low resolution, to name a few.

3D printing

We will demonstrate to you now how you can save yourself from committing such mistakes by highlighting some of the most common errors when 3D printing in Australia and how to avoid them.

Incorrect use of technology

3D printing utilizes a variety of techniques.

The technology that will be used in a 3D printing project is largely determined by the materials used. While some materials, such as polyamide, aluminum, and ABS, can be printed together, others can not be worked on together at the same time and may sometimes even require the use of multiple technologies to further process them.

To achieve the desired results with certain materials, such as selective laser sintering, plastic, or fused deposition modeling (FDM), the use of the right technology is a must. 

Likewise, multijet printing and digital light processing are optimal for resin and wax materials. Therefore, to prevent the use of incorrect technology, consider the components you are utilizing and make sure that the working technology behind your 3D printer is appropriate for it. 

The 3D printer is not properly configured.

The most obvious explanation for encountering mistakes or errors when printing in 3D is because the machine you are using is not configured in the right way. Hence, you must possess the needed technical expertise to veer away from possible mishaps while the 3D printer machine is working or in use. 

Nozzles not working, running out of filament, and clogged print heads are some of the most common setup errors that set the stage for printing errors to occur.

In a very urgent situation, you can instead opt to have your 3D printer machine configured by a qualified technician. Additionally, we encourage you to commit time to read and understand the instructions provided in the user manual. Doing so will help you to set up your 3D printing machine in the proper way.

Failing to take into consideration the file resolution.

3D prototypes

The most common mistake that people commit when printing 3D prototypes is when they happen to choose the incorrect resolution. Resolutions that are way too low often lead to uneven prints.

However, if the resolution is on the opposite side of the fence or way too high, they tend to become unwieldy, or handling them will become a bit challenging. It is then imperative to set the resolution right so you can be sure you are going to have the highest quality prints.  

When 3D printing in Australia, you must pick the appropriate STL file resolution. The use of STL files may be overwhelming to some because they only outline the prototype’s outer surface. 

STL file format errors can lead to intersecting faces, non-manifold edges, awful boundary edges, or an over-refined mesh.

Conclusion

There are many, many times that you will get yourself frustrated when printing your material in 3D. That is because a gamut of issues can arise upon using the 3D printer.  

It is such a relief to know that, most of the time, common 3D printer issues are easily resolved. Most of these issues can be resolved relatively fast, all you will need to do is apply some tweaks to the 3D printer machine software settings.

However, if the nature of the problem is mechanical in nature, we encourage you to reach out to your brand manufacturer instead for further help and assistance.  

How to Use Jamboard App for Online Teaching and Collaboration?

If you are an educator, conducting an online class with Jamboard is a breeze. It can accommodate a threshold of 50 collaborators (students) at a time. Therefore, if your online class consists of 30 student heads, everyone should be able to hop during an active ‘jam’ session. 

With 30 students in, there is still plenty of room for more (20 more students) before you hit the threshold mark of 50.

Jam session participants can view/watch on their devices (mobile phones, tables, desktop/laptop computer) everything that is being done and presented on the Jamboard in real-time. And this happens without necessitating them to be in the same room as the presenter.

online class during COVID

Location of Participants in an Online Learning

Participants in an online class can be in another room or in the next building after the presenter/host of the Jamboard session. Participating students can also come from a different or remote place.

For as long as they have online connectivity, approved participants can join a Jamboard session on their devices. 

Not only can your Jam participants see what you have on the Jamboard, but they can also interact with the presenter with the devices they use. They can do so by commenting on the board with their questions, raising issues, or if they want the presenter/teacher to make some clarifications on the topic/lesson being presented. 

The Jamboard app takes away that usual classroom scenario where the instructor always takes the center stage and instructs the students. It is a kind of linear interaction that impacts learning, and Jamboard intends to change all that by promoting online collaboration and interactivity. 

Let us delve deeper into this now. Before anything else, we need to familiarize with the tools. 

Important Jamboard Tools to Know for Online Learning

If you are an educator, go to the Jamboard Google homepage.

On this page, you should be able to see all the previous ‘jam’ sessions you did in the past. For the first time, users here is how you create a jam: 

  1. Head yourself to the bottom right-hand corner of your screen. Go and select the “Add” button. You will be required to supply an appropriate name for your jam session. 
  2. At the top of your screen, you can change your Jam background color. For this, you can opt for a blank slate or dotted lines. You can also go for a lined paper or graph paper. 
  3. Go to the left-hand side of the screen to check out the options on how you can interact with the Jamboard. The pen tool can be used to handwrite your text on the interactive whiteboard. With that, you also get to choose an array of colors to use for the pen tool. 
  4. Next to the pen tool, you have the eraser tool. You use this tool to efface/delete the text you wrote on the board using the pen tool. 
  5. Below the eraser tool, you have the select tool. This usability feature allows you to pre-select selectable items on the interactive whiteboard. 
  6. After the eraser tool, you have the sticky note tool, which comes in different colors for distinction and variety in using them. You can drag the sticky note anywhere on the screen and add your text to it. The sticky note can be resized to your liking or preference, and you can also change its orientation. 
  7. Beneath the sticky note, you have a tool there that allows the user to add relevant images on the interactive whiteboard. Inside this usability tool, users are given an array of different options for images. There is an option to perform a Google image search, load an image from Google Photos, or upload an image file from your local computer drive. 

Like the sticky note, you can resize your uploaded image, duplicate it or change its orientation. You can also drag your uploaded photos anywhere on the screen where you deem most appropriate. 

To emphasize a point on the board. 

Below the image tool, you have the laser tool. This helps you to point to different places on the interactive whiteboard. It is a very useful tool to have when you want your students to focus on something you have on screen. 

homeschooling

If you want your online class session to be a bit more fun and interesting for your students and not drab and dull, you can choose to install the free Giphy extension. You can do this through the Google Chrome extensions. 

You can then drag and drop your chosen Giphy file anywhere on the board. The same thing goes if you are leaning for Bitmojis instead. 

How to Add Additional Frames to Your Active Jamboard Session

At the top of your screen, there is a navigational arrow. You click on the right, you will add new frames to your whiteboard. These are essential new board panels you can use. 

On the top menu also at the far right corner, you are given an option to download your Jamboard session either as a pdf file or an image file. 

The purpose of using Google Jamboard is to provide an interactive online learning tool where students (session participants) can add to as well.

How to Share Your Jamboard Session to Your Students

To share the Jamboard session with participating students, use the share button at the top part of the menu. This can be found in the right-hand side corner of the screen. 

You will be asked to provide the name of participants (students) you want to share the Jamboard session with.

If you want the student, or another teacher, to be able to write or make edits on the learning session, you need to give them editing access. Choose ‘viewer’ if you are not allowing the participant to make any kind of modification on anything on the Jamboard. Otherwise, you select ‘editor’ instead.

You can do this on the drop-down menu. 

Now to share the Google Jamboard session with everyone in your class, you need to go down to the “Get Link” option. 

Here you are given a chance to change the restricted access to “anyone with the link”. This one time link allows everyone in the class to join your online learning session through Jamboard.