Is spa maintenance that hard? Are you looking for spa filters or other Australian spa parts? Keep in mind that frequent hot tub use requires more frequent and comprehensive hot tub maintenance.
The reality is that hot tub maintenance is quite straightforward, and if done correctly, you’ll spend less time maintaining and more time relaxing. You may use this article to familiarize yourself with the basics of hot tub maintenance.
Know that the more water you circulate in a spa, the cleaner it will be. Inorganic and organic pollutants have little time to settle and build up in your spa if the water is continually flowing. Your filters will collect and trap more pollutants with frequent circulation. As a result of this, it is vital to routinely clean and soak your spa filters.
Spa Filter Cleaning
- Using your hose, wash your hot tub filters.
- Your filters should be cleaned regularly by spraying them with a professional filter cleaner.
- Drain and clean your filters using a professional chemical cleaner. The chemical bath is a good time to clean your filters while your hot tub is being completely cleaned.
- Consider the integrity of your filters. It’s time to change your filters if you find that they’re appearing old or unclean even after rigorous cleaning.
The shell of your hot tub should be scrubbed every week to remove build-up. Every week, give your outdoor hot tub a good clean down to remove organic and inorganic pollutants that accumulate.
A soft sponge should be used to clean your shell, including any grooves, crannied or jetted areas. As a result, your spa will not only be free of build-up but will also be sparkling.
A testing kit, test strips, or other professional testing items are needed to determine the water chemistry of your spa.
It’s best to keep your pH range balanced. In addition to damaging your spa, acidic water may also cause damage to your eyes, skin, hair, and nails. Basic water might interfere with the effectiveness of your sanitizer.
Between 125 and 150 parts per million should be your spa alkalinity level. Scaling, scum, and murky water can be caused by high alkalinity levels in the water supply system.
It is recommended that you have a spa calcium level between 100 and 250 parts per million. If your calcium level is too low, it might lead to corrosion of your equipment. Too much calcium can cause your water to cloud up and cause scale to build up in your spa if you have an excessive calcium hardness level.
Confused about changing spa filters, Australian spa parts, and overall maintenance? No matter if you are a hot tub novice or a hot tub veteran, remember to do a little additional maintenance. Keep your hot tub functioning smoothly and enjoy bathing.